Shenzhen KYL Communication Equipment Co., Ltd
Fax: +86-755-83408785
www.rf-data.com
6
4. Setting of channel, interface, and data format
Before using KYL-300L, the user needs to make simple configuration to
determine the channel, interface mode and data format based on his own needs.
You can view or change the module's interface baud rate, channel and address
code, parameter setting or reading as per the testing software KYLCOM in the PC
(in products box). And the configuration is as follows:
i. Channel configuration:
Channel No.
Frequency
Channel No.
Frequency
1
429.0325MHZ
5
433.0325MHZ
2
430.0325MHZ
6
434.0325MHZ
3
431.0325MHZ
7
435.0325MHZ
4
432.0325MHZ
8
436.0325MHZ
Note: the frequency points corresponding to each channel can be adjusted
based on the user’s needs.
ii. The schematic diagram of setting the parameter as follows:
a. Connect the PC and module with RS232 data cable.
b. Open the “KYLCOM” PC software, then select “English” as follows:
