S
ervice
GHT-510D
G
uide
Disassemble & Assemble the Power Supply PCBA
Step 1
*Disassemble the Rear Cover
first.
Disconnect the cable.
Step 2
To loose 5 screws. First B-C-D
and then A & E.
Step 3
To suck the solder-point of the
wires on Power Supply PCBA.
And remove the wires.
*Mark the position of wires
Step 4
To suck the solder-point of the
wires on Power Supply PCBA.
And remove the wires.
*Mark the position of wires
*To install the Power Supply
PCBA, reverse the steps shown
above.
wires
cable
P.S.
PCBA
E
D
C
A
B