*
Ensure that the surface of the initial position is clean to prevent the product from slipping or falling due to heavy contamination of the tracks
12
4. Use guide
4.5 How to use this product
4.5.3 Start the Kwun
1. Corner placement
Select the starting point with the least number of turns for
horizonal autonomous operation.
Kwun is placed on the bottom corner of the left and right
sides of the photovoltaic array that meets the requirements.
3. Position calibration
Adjust the horizontal central axis of the device to the spacing line of the
cells in row 1 and row 2 in the lower corner, and the horizontal central
axis to the spacing line of the cells in row 1 and row 2 in the lower corner.
2. Turn on the power
Press the power button to start the device. When the first red
light is off, the device is normal and enters the initialization
state.
4. Start the job
When the green light is steady on and the red light is off (the buzzer
beeps once), and the initialization is successful (about 22s), press the
start/standby button to start the device.
The interval between components is less than 4cm
The height difference is less than 1cm
The lowest point of the component suspension is greater than 10cm
Dry brush tilt less than 20°, wash tilt less than 10°
*
Holes on the support plate of the synchronous wheel indicate the
central position of Kwun, which can assist in position calibration.
