5
3 Operation illustration
3.1 Panel operation
1) Signal CH selection
Press source switch to convert to PC/AV (refer to exterior illustration to get PC/AV input terminal). Only when
transmitter and the receiver are in the same channel, signal can be transmitted normally. Transmitter (SA240-TX)
will automatically follow your operation instruction to switch to signal channel when you have PC/AV switching
operation on the side of the receiver (SA240-TR).
Panel indicator status as below:
2) Power on/off
Press
enter or exit standby status.
Power on/off status panel indicator as below:
3) Channel selection
Press channel switch to convert to four 2.4GHz channels.
Notice
: Only when the receiver and the transmitter in the same channel, can the A/V signal be normally transmitted.
Channel selected status indicator as below:
Notice:
If wireless LAN like 802.11(WiFi device) is used in your house, please select channel1 or channel4 and adjust 2.4GHz antenna
to avoid its interruption.
