©2017 Spectrum Brands, Inc.
1. Keep door open. Press the Program button
once. The Checkmark will flash five times and
you will hear five beeps.
2. Press Checkmark symbol once.
3. Press Lock symbol once.
4. Enter Mastercode.
5. Press Lock symbol once.
6. Press “9” six times.
7. Press Lock symbol once.
8. Press “9” six times.
9. Press Lock symbol once.
If programming is successful, the Checkmark
will illuminate and you will hear one beep.
If programming is unsuccessful, the “X” pattern
will flash three times with three beeps. Make sure
to enter a valid Mastercode in step 4 during your
next attempt.
While the door is open and unlocked, press
the Lock symbol. If the latch bolt does not
extend to lock, then all codes have been
successfully deleted.
66852 / 01
954
5 / 16
Technical Support
1-866-863-6584
www.kwikset.com
E
Deleting All User Codes with the Mastercode Enabled
