5. Attach base to crossbar and bottom back bar as shown.
Note direction of decals before fastening. Assemble all
hardware first, then go back and tighten each bolt. Be
sure connections are pressed firmly together before
tightening hex bolts.
6. Using a rubber mallet, install bolt caps on exposed threads of
7/16” X 6” hex bolts.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Left Base
Back Bottom Bar
Crossbar
Right Base
Decals
Channel Spacer
3/8” X 1-3/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
3/8” Square Nut
Left Base
Crossbar
3/8” Square Nut
Bolt Cap
Bolt Cap
Rubber Mallet
NZ391 Rev. 07/15/19
Back Bottom Bar
7/16” X 6” Hex Bolt
Channel Spacer
Left Base
7/16” Flat Washer
7/16” Lock Nut
3/8” X 1-3/4” Hex Bolt
Back Bottom Bar
Back Bottom Bar Connector
3/8” Lock Washer
3/8” Flat Washer
