21. Tension 1st net rope assembly to remove any slack in the net side walls, both vertically and horizontally. Loop
ends of 1st net rope assembly around top knobs and tighten knobs to hold tension in rope. Minimum tension
required for a good appearance is recommended. Knobs should be locked in place at approximately the same
height on left and right poles.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ391 Rev. 07/15/19
Knob
1st Net Rope
Assembly
Pull
2nd Net Rope
Assembly
22. Remove sag in the net by tensioning 2nd net rope assembly. Loop
the ends of 2nd net rope assembly around bottom knob in left and
right poles. Minimum tension required for a good appearance is
recommended. Knobs should be locked in place at approximately the
same height on left and right poles.
1st Net Rope
Assembly
2nd Net Rope
Assembly
Go to kwikgoal.com for additional product information.
