NZ393 Rev. 02/11/19
2. Open base frame by swinging outward until button locks
in place in center connector as shown. Use care to keep
net from getting pinched in moving parts.
3. Pull left and right rear base until button locks into place
on right and left center base.
Do not force parts.
Parts
should move freely, if parts do not, look for points where
net may be caught on frame.
Pull until button locks in place
Open until button locks in place
Base Frame
Base Frame
Center Connector
Base Frame
Base Frame
Center Connector
Pull
Pull
Left Rear Base
Right Rear Base
Right Center Base
Left Center Base
