Bottom Bar
Left Base
Right Base
5. Attach left base and right base to back bottom bar using channel spacers and 3/8” x 1 1/2” hex bolts. Note
direction of decals on back bottom bar before fastening. Be sure connections are pressed firmly together
before tightening hex bolts.
6.
2B3306SW & 2B3406SW
- skip to step 8, all other goals continue to step 7.
7. Insert two 3/8” square nuts into left base and right base.
NOTE: If installing optional wheels (Part#
10B403), also include two threaded channel spacers from wheel option package in each base.
To
prevent threaded channel spacers or square nuts from falling out during assembly, temporarily insert a 3/8”
hex bolt in last threaded hole of the threaded channel spacer or square nut and finger tighten only.
NZ224 Rev. 08/11/14
12"
Minimum
Temporary
3/8" X 1 1/4" Hex Bolt
3/8" Square Nuts
Left and Right Base
Threaded Channel Spacers (metal)
(For wheel option 10B403)
3/8" Square
Nuts
Channel Spacer
(plastic)
Bottom Bar
Right Base
3/8” X 1 1/2” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Threaded Channel Spacers (metal)
(For wheel option 10B403)
