NZ328 Rev. 9/18/18
9. Attach 3/8” X 3” threaded stud to brace on
plate with threaded hole. With square nut &
stud, attach braces to bottom bar using
knob & 3/8” lock nut. NOTE: Tighten 3/8”
lock nuts only until flush with end of stud so
knob can turn. Loosen knob to slide brace
to hold upright and when upright is plumb
tighten knob to hold brace in place.
Net
10. Lay out net out as shown. Clip rope to net in 4 locations.
Knob
Bottom Bar
Upright
Bottom Bar
Square Nut & Stud
3/8” Nut
3/8” Lock Nut
3/8” Lock Washer
3/8” Flat Washer
3/8” X 3” Threaded Stud
Threaded Plate
Brace
Knob
Net
Snap Link
Rope
Top Corner Tag
Threaded Plate
Upright
3/8” X 3” Threaded Stud
Brace
WARNING
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE
THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED
UNDER KWIK GOAL’S LIFETIME GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
