Assemble posts, crossbar, crossbar corners and post corners as shown. Be sure sticker on crossbar is oriented
correctly. Press joints together firmly before tightening bolts.
Note:
Square nuts will float loose in channel until used later.
4. Hardware for steps 4 through 6 are in the
Frame Hdw
and
Connector Hdw
packs
Post
Crossbar Corner
Crossbar Corner
Crossbar
Post
Left Corner
Right Corner
Right Corner
Post
Post
Channel Spacer
(Plastic)
3/8" Flat Washer
3/8" Lock Washer
3/8" x 1-3/4" Hex Bolt
3/8” Square Nut
Post
Crossbar Corner
Crossbar
3/8” Square Nut (2)
3/8" x 1-3/4" Hex Bolt
3/8" Lock Washer
3/8" Flat Washer
Post
NZ429 Rev. 10/07/19
Channel Spacer
(Plastic)
Crossbar Corner
Crossbar
3/8” Square Nut (2)
3/8" x 1-3/4" Hex Bolt
3/8" Lock Washer
3/8" Flat Washer
Post
Channel Spacer
(plastic)
Left Corner
Post
Post
3/8" Flat Washer
3/8" Lock Washer
3/8" x 1-3/4" Hex Bolt
3/8” Square Nut
Channel Spacer
(Plastic)
***CAUTION***
Any modifications to this or any Kwik Goal product will void any and all warranties.
Sports equipment not in use must be disassembled and stored in a safe, secure place.
Assembled sports
equipment should not be left unattended.
Sports equipment should be checked for safety on a regular basis.
Top of sticker
this side
