kwb
THERMO-FIXX
Art.-Nr. 012310
1 m
12 : 1
Safety advice:
• Do not look into the laser beam directly.
• The beam can damage your eyes permanently.
• Do not point the laser beam at persons or reflective surfaces.
• Keep the working area clean and tidy.
• Avoid the instrument being affected by blows and impacts.
• Never expose the thermal measuring instrument to moisture and rain.
• Keep the thermal measuring instrument in a dry, secure place.
• If the thermal measuring instrument will not be used for a long time, then remove the batteries in order to avoid damage being caused by
leakage from the batteries.
• Check the thermal measuring instrument and all individual parts for damage before use. Only use the instrument if all parts are in proper condition.
• Repairs are only allowed to be carried out by skilled personnel.
• Only utilize the thermal measuring instrument for the measuring activities which are stated in the operating instructions.
• Only utilize accessories that are expressly recommended for using with the thermal measuring instrument.
• Any manipulation that leads to increasing the laser´s power is prohibited. Any liability is refused for damages which arise from non-compliance
with this safety advice.
• The thermal measuring instrument does not contain any serviceable parts. Do not open the casing for this reason because the guarantee will be
invalidated otherwise.
• Keep the thermal measuring instrument out of the reach of children.
Changing the batteries
If the instrument´s performance deteriorates, then the
batteries must be changed. Open the battery compart-
ment (7) on the instrument´s side, in order to change the
batteries. Used batteries must be disposed of properly.
Results that are measured with the thermal mea-
suring instrument must be checked generally. kwb
does not accept any liability for measuring errors and
the consequential damages resulting from them.
Technical data:
Measuring range:
-20 to +320° C (0 bis 626°F)
Operating temperature:
0° - 50°C
Power supply:
1 x 9V Block
Accuracy:
measurement 0°C to 320°C = +/- 1,5°C
or +/- 1,5%
measurement - 50°C to 0°C = +/- 3,0°C
Response time:
< 500 ms
Optics:
12:1
Laser´s wavelength:
650 nm
Maximum release of energy: 1mW
Laser class:
2
Laser radiation - Do not stare
into the beam!
Laser class 2 acc. to
EN 60825:2007
Declaration of Conformity
We, kwb Germany, declare in our sole responsibility that the
THERMO-FIXX referred to in this declaration complies with the following
standards: EN 60825:2007 EN 61000-6-1:2007 EN 61000-6-3:2007/
A1:2001 and the provisions of the Directive EMC 2004/108/EC.
kwb Produktentwicklung
kwb Germany GmbH
Hauptstrasse 132
28816 Stuhr, Germany
Please observe!
Do not dispose of electric
appliances with your household rubbish.
Please bring them to the appropriate
collection point.
kwb_ThermoFixx_Bedienungsanleitung.indd 6
01.04.15 11:44