17
GENERAL MAINTENANCE FOR KWA GAS BLOW BACK
Green gas is a liquid propellant which tends to dry out the seals and o-rings. With lubricating
silicone oil, it will extend the life of the seals and o-rings and prevent gas
leaks.
Use only the recommended 100% silicone oil, available for purchase at the Airsoft dealer
where you purchased your KWA products. Any other type of lubricant may damage the
products.
Lightly lubricate the recoil spring, cylinder and moving parts with a few drops of oil.
Lubricating the seals and o-rings are essential. Unload BBs from the magazine. Make sure
the magazine is free of gas before lubricating the magazine’s charging valve and release
valve.
6
1
2
4
3
5
LOADING BBs
1. Pull the magazine follower down until it locks.
2. Insert BBs into the magazine lip.
3. BBs should stack staggered for maximum round capacity.
4. Make sure to have a 3mm clearance between BBs and the top lip of the
magazine.
5. Push the magazine follower lock to release.
WARNING: Do not release the magazine follower when the
magazine is empty. Doing so will damage the magazine and
magazine follower.
WARNING: Always use high quality 6mm BBs, weighing 0.2g or
heavier. For best result use 0.25g KWA Perfect BBs. Never use
recycled or low grade BBs to prevent damage to your gun.
!
!
Check for 3mm
clearance after
loading BBs.
3mm
Magazine Follower
M11A1 NS2
Push
down
to lock
Push to
release
Magazine Lip