manualshive.com logo in svg

KVMSwitchTech HD-MTX-88-4K, Инструкция по эксплуатации

Поделиться
Скачать
KVMSwitchTech HD-MTX-88-4K Скачать руководство пользователя страница 13

EDID FUNCTION

EDID FUNCTION FOR HDMI MATRIX SWITCHER

EDID Setup

To Change the EDID Setup

Step 1.

 Press the 

EDID

 button

The display will show the currently selected EDID mode

Step 2.

 Press 

SOURCE

 #1 or #2 button row

The button will fl ash blue and the display will show the current 

Embedded

 

EDID

 Status.

Step 3.

 Press the

 ENTER

 button

To set 

EDID

 mode. The switcher will return to operation mode.

Operation will abort if no keys are pressed within 5 seconds.

RESET

EDID Return To Factory default

How to RESET EDID mode

Press 

     EDID   >   RECALL   >   ENTER

RESET To the FACTORY DEFAULT (1080p-2CH).

Press 

EDID

 button : The LCM will show the current EDID status.

Press 

RECALL

 button : The LCM will show the RESET EDID.

Press 

ENTER

 to confi rm entries.

The EDID will return to FSS mode and resolution 1080p-2CH.

Embedded EDID Modes

Total 8 EDID Modes

Embedded EDID setup

Press 

     EDID   >   SOURCE   >   ENTER

SOURCE #1

or

SOURCE #2

Select Embedded EDID :

Mode 1 : FSS
Mode 2 : H24-3D
Mode 3 : H24-3D-M
Mode 4 : H36-3D

To select Embedded EDID mode or LEARNING mode.

Press

 EDID

 button: The LCM will show the current EDID status.

Repeatedly depressing the 

Source 1

 button will cycle 

up

 thru the options.

Repeatedly depressing the 

Source 2

 button will cycle 

down

 thru the options.

EDID function for HDMI Matrix Switcher

Mode 1. FSS (Fast Speed Start)

Fast Speed Start

 mode shortens the startup time of the switcher. Selecting this mode 

does not force the EDID setup to be cancelled. Users may fi rst select one EDID mode 
from mode 2 to 3, and then select mode 1 for fast speed start.

Mode 2. H24-3D (1080p-24 bits)

Audio Support: PCM 2CH

Mode 3. H24-3D-M (1080p-24 bits)

Audio Support: MAT(MLP) 7.1CH, PCM-2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS 
5.1CH, PCM 7.1CH, Dolby D 7.1CH, DTS-HD 7.1CH

Mode 4. H36-3D (1080p-36 bits)

Audio Support: PCM 2CH

11

Mode 5 : H36-3D-M
Mode 6 : 4K2K
Mode 7 : DVI-D 1920x1200-60Hz

Содержание HD-MTX-88-4K





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды