manualshive.com logo in svg

KVMSwitchTech HD-MTX-88-4K, Инструкция по эксплуатации

Поделиться
Скачать
KVMSwitchTech HD-MTX-88-4K Скачать руководство пользователя страница 10

BACK PANEL

BACK PANEL

8

1. DC POWER INLET: 

The Switcher is fi tted with a DC power plug input connector. 
Ensure that the used is of an approved type and is of suffi cient 
current carrying connector capacity with the correct voltage and 
connector polarity. 12Volt DC power supply 5A Max (Center pin 
positive).

2. IR EXTENDER CONTROL: 

Support one of IR Extender. Extend distance maximum 300 
Meters / ~984 feet. When you plug the External IR extender into 
the switcher, the front panel IR receiver remain active.

3. RS-232 CONNECTION: 

RS-232 control port to allow for interfacing to a PC. Such as a 
computer or touch panel control, to the switcher via this DB-9pin 
Female connector for serial RS-232 control.  

4. ETHERNET CONNECTION: 

ETHERNET control port to allow for TCP/IP interfacing to a PC. 
Such as a computer or touch panel control (not a web-browser), to 
the switcher via this RJ-45 Female connector to control switcher.

5. INPUTS- 1,2,3,4,5,6,7, & 8 HDMI

Connect an HDMI signal source to this Input. This HDMI port 
supports HDMI with embedded audio and DVI with AUX audio 
sources. If you remove the HDMI screw post, you must use the 
provided ISO screws to keep the internal HDMI jack secure. 
Removing the HDMI Screws without installing the ISO screws 
will void your warranty.

6. OUTPUTS- 1,2,3,4,5,6,7 & 8 HDMI

Connect an HDMI signal source to this Output. This HDMI port 
supports HDMI with embedded audio and DVI with AUX audio. 
If you remove the HDMI screw post, you must use the provided 
ISO screws to keep the internal HDMI jack secure. Removing 
the HDMI Screws without installing the ISO screws will void your 
warranty.

Power Jack:

DC Jack - inner OD Ø 2.1mm (+ )
Outside OD Ø 5.5mm (GND)
Power input - 12VDC, 5A

IR Extender Jack:

 Female Jack - inner OD Ø 3.5mm

Remote Port:

 D-SUB-9pin Female connector

Remote Port :

 

Control the switcher RJ-45 Female 

connector

Ethernet Port:

 Note: the Ethernet port and RS-

232 port cannot be used simultaneously. Any 
connection to the Ethernet port will disable serial 
commands send to the RS-232 port.

HDMI connector: 

HDMI Type A SMD 19pin Female 

socket connector.

Note: With the proper adapters, the switcher 
can be used with DVI digital video signals HDCP 
compliant. The DVI support Audio input.

HDMI connector: 

HDMI Type A SMD 19pin Female 

socket connector.

Note: With the proper adapters, the switcher 
can be used with DVI digital video signals HDCP 
compliant. The DVI support Audio input.

Содержание HD-MTX-88-4K





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды