36 | kvm-tec
kvm-tec | 37
3. EXTENDER sETTiNgs
3. EXTENDER sETTiNgs
3.9.7 shoW thE last REcEIVEd IMaGE
You can choose what to show on the monitor connected to the remote unit when the local
and remote are disconnected, or the remote unit is not in use. If the show last image feature
is disabled, the monitor shows a black screen. If the show last image feature is enabled, the
monitor shows the last image received before disconnection.
to activate or disactivate the function press 5
3.9.8 UsING thE PoWER saVING ModE
You can choose to enter power save mode if the remote unit doesn‘t receive anything from the
local unit for more than a minute.
If your remoter is set to show the last image received when it becomes disconnected, the monitor
shows the last image for one minute, and then enters power save mode.
To return from power save mode, press any key.
Enable and disable power save mode on the remote screen. In the main menu, press G > R.