KVM-TEC 6014, Руководство пользователя

Страница: 11 / 43

20 | kvm-tec
1. IntroductIon
1.9 aboUT The sTaTUs led
The Status LED (8/15) can light red, orange or green. Table 1 shows the meaning of each colour.
Also see chapter
Troubleshooting .
normal operation
* MX only ** Rem. Only
Meaning of LED indicators
Colour blinking Physical
link
Active
Connection
video
extended Usb
Initialisation Usb data
Received
Identify
Command autoupdate
mode
Red - Yes No No Update Failed
Red Slow No No No
Orange - Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow - No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
main led
RJ45 socket
leds *
kvm-tec | 21
2. InsTallaTIon eXTendeR
2.1 UnPaCkInG and CheCkInG The ConTenTs
Before using the product for the first time it should be checked for damage. In case of damage
due to transport inform the carrier immediately. Before delivery the product is checked for its
function and its operating safety.
• Make sure that the packaging contains the following content:
MAXflex single copper
Delivery content - Local (CPU)
1 x MA local (CPU)
1 x wall power supply unit l 12V 1A (EU-plug or INT. plug)
1 x DVI - DVI cable 1,8m (5.9ft)
1 x USB cable 1,8m (5.9ft)
4 x rubber feet
Delivery Content - Remote (CON)
1 x MA remote (CON)
1 x wall power supply unit l 12V 1A (EU-plug or INT. plug)
4 x rubber feet
MAXflex dual copper
Delivery Content - Local (CPU)
1 x MA2 local (CPU)
1 x wall power supply unit l 12V 1A (EU-plug or INT. plug)
2 x DVI - DVI cable 1, 8m/5.9ft
1 x USB cable 1, 8m/5.9ft
4 x rubber feet
Delivery Content - Remote (CON)
1 x MA2 remote (CON)
1 x wall power supply unit l 12V 1A (EU-plug or INT. plug)
4 x rubber feet