11
Hardware Preparative Procedure
Before You Use
1. To prevent damage to your installation it is important that all devices are properly
grounded.
2. Make sure that the power to all devices connected to the installation are turned off.
You must unplug the power cords of any computers that have the Keyboard Power On
function.
3. A computer connected to the KVM switch should only be powered on after all of the
connections to the device are made(DVI, USB and audio).
Cable Connection
To set up your AS-21DA / AS-41DA installation, do the following:
1. Plug your USB keyboard and USB mouse into the USB console ports located on the
unit’s rear panel.
2. Plug your console monitor into the DVI console port located in the unit’s rear panel and
power on the monitor.
3. Plug your microphone and speakers into the console microphone and speaker jacks
located on the unit’s rear panel.
4. Using a KVM cable set, plug the DVI connector into any available DVI socket in the KVM
port section of the switch, then plug the accompanying USB, microphone and speaker
connectors into their corresponding USB, microphone, and speaker sockets.
Note:
Verify that all the plugs are in the same KVM Port sockets (all in Port 1, all in Port
2, etc.).
5. At the other end of the cable, plug the USB, video, microphone, and speaker cables into
their respective ports on the computer.
6. Plug the DC adaptor into power switch.
7. Turn on the product.
