KVH Industries TracNet H30, Руководство по установке

Страница: 23 / 40

21
TracNet H30 Installation Guide
Configure the System
Assign a Guest Account Password (Optional)
At the second page of the wizard, you can set the
following:
• PASSWORD : Enter and then re-enter a guest account
password of the customer’s choice
Note: The case-sensitive password must be between 8
and 64 characters in length, with at least one letter, one
number, and a special character.
Figure 35: Assigning the Guest Password
When you are done, select Next .
Configure LAN Settings (Optional)
At the third page of the wizard, you can make any
necessary changes to the following LAN settings:
• IP ADDRESS : Change the default IP address
• SUBNET MASK : Change the default subnet mask
• DHCP MODE : Set to “ON” or “OFF” (If DHCP is on,
select a DHCP START and DHCP END range)
Note: By default, the LAN has a gateway of 192.168.5.1
and assigns IP addresses in the 192.168.5.50-150 range.
Figure 36: Configuring LAN Settings
IMPORTANT!
The default LAN settings work well for most
installations. Do not change these settings unless
absolutely necessary, such as to avoid conflicts with an
existing onboard network.