Quick Set packing
25
Quick Set packing
Requirements
•
Suitable flat surface approx. 10 x 10 m as assembly space.
•
Lifting gear with lifting accessories for at least 1,000 kg
•
Floor conveyor (pallet truck or fork lift)
•
Stands for safely depositing implement parts.
•
Spanners for tightening bolts.
Preparations for
assembly
Place the wooden crate on level ground (with the pallet floor at the
bottom) and open it without damaging the parts inside.
Take out loose parts (wheels, axles, boxes, etc.).
Clear plenty of space around larger components to make access
easier.
Checking the scope
of delivery
Check that the scope of delivery is complete.
In the event of missing, incorrect or damaged parts, fill in the
"REPORT MISSING PARTS" form and send it to the "ORDER
DESK" in Kerteminde straight away.
Removing the
surface protection
Remove the surface protection (e.g. Tectyl) with which the bare
surfaces (such as tine arms, tine supports and bearing shafts)
have been coated.
Grease the bare surfaces using a brush.
Pallet assembly
Use suitable lifting accessories to lift the frame elements.
Loosen all fastenings (wires, lashing straps).
Follow the handling instructions below.
Observe the safety information
Observe the safety information when carrying out all work.
Disregard for safety information can lead to serious or fatal injury.
No persons within the slewing range
There is an acute risk of injury within the slewing range from
machine parts which are slewing or folding. Serious or fatal injury
would be caused as a result.
