16
Because the adjustment of this position depends on the height of the tractor tow hook,
it must always be readjusted when hitching the cultivator to a different tractor.
MIDDLE SECTION AND WING SECTION ADJUSTMENT
:
B
•
The height of the middle section is aligned with the height of the wing sections
by turning the piston rod of the middle cylinder (
B
).
•
When the rod screw is extended, the middle section rises. Correspondingly,
when the rod screw is retracted, the middle section lowers in relation to the
wing sections.
•
The end piece must be locked with the lock nut after adjustment.
•
No more than 15 mm of thread may be exposed.
•
Check this setting in the field before starting to harrow.
Lower the cultivator on its tines so that the mounting bolts of the cylinders
have some play. Shut down the tractor! Pay special attention when you move
between the frame of the cultivator to access the end piece to be adjusted.
Never walk or stand on the frame
!
The relative height of the wing sections can
be adjusted by turning the cylinder piston rod.
The end piece must be locked with the lock nut
after adjustment. No more than 15 mm of thread
Содержание TIGER 500
