10
Transport on roads
•
Slowly raise the wing sections fully into the transport position. They are controlled
with the same hydraulic valve as the frontboard during harrowing.
•
Ensure that the automatic locking bars lock into their holes and do not drive
off before both wings are locked.
•
Close valve A in the middle section wheel cylinder before transporting
the cultivator on a public road.
•
Close valve D in the control hose for wing sections before transporting
the cultivator on a public road.
•
Check that the cultivator is sufficiently clean before driving on a public road.
•
Check the condition of the tyres and draw bar assembly.
•
Check that the running lights are connected and that they work.
•
Pay attention to the transport height.
•
Drive carefully and obey all traffic rules.
Insufficient tyre pressure or high speed (over 40 km/h) may result
in damage to the tyres!
REMEMBER TO KEEP YOUR HANDS AWAY FROM THE HYDRAULIC
CONTROLS WHILE DRIVING ON THE ROAD!
Содержание TIGER 500
