Kverneland Optima TFprofi ll, Руководство пользователя

Страница: 94 / 150

94
94
1,5 – 3
mm
Trouble-shooting – answers
6. Hydraulic motor for fertilizer does not turn.
Check if the non-return valve in the pressure line installed correctly. The
arrow on the valve should point toward tractor.
non-return valve
7. Revolutions of hydraulic motor for fertilizer is very high.
Check fertilizer shaft speed sensor. If the distance between sensor and
gear wheel more than 3 mm, the system does not register pulses and
revolutions of the hydraulic motor increase.
8. LED
на датчике маркера светится, маркер поднят, но в рабочем
меню показывает что маркер опущен.
Проверить кабель сигнала датчика (черный). Если нет сигнала, то
LED
светится, но датчик не имеет функции.
9. Machine is in working position, end switches are activated, speed
sensor receives signal, but motors of the seed rows do not turn.
“STOP” symbol is shown on the monitor.
Check cable end switches (white).