28
5.10
Combi disc
Depth setting on Combi disc:
- Lift the machine
- Open hydraulic cylinder
- Add or remove plastic spacers to adjust the working depth
- Adding spacers reduces the working depth
- Removing spacers increases the working depth
- Apply the same setting to all cylinders
Setting the angle of the combi-disc:
Some positions indicated on the setting plate might not be available depending of
the accessories mounted on the machine
- Check if the angle is compatible with the machine configuration
- Unscrew the lock nut « A » using the spanner n
°36 in order to release the
indexing system
- Place the spanner n
°36 on the handling assistance nut « B » and rotate the gang
of the discs to the suitable angle
- Make sure that the indexing system is located at a predefined position and
retighten the lock nut « A »
A
B
5. Adjustments
