Kverneland CLC Evo Скачать руководство пользователя

Страница: 52 / 86

Adjustments

MPORTANT

NOTE

Never turn the machine with the tool in the ground.

Adjustment of the

working depth

The working depth of the stubble tines is controlled by the rear roller
and/or by the optional depth control wheels at the front of the machine.

Perforated plates

On machines fitted with a parallelogram system, the working depth is
adjusted on the perforated plates, as determined by the lower shaft.

The sticker opposite is pasted onto the perforated plates to make it
easier to adjust the working depth.

•

The holes in the light gray part are used to adjust the machine for
surface work.

•

The holes in the gray part are used to adjust the machine to work
at a medium depth.

•

The holes in the dark gray part are used to adjust the machine for
deep work.

WARNING

•

Comply fully with safety instructions.

•

Keep a safe distance during handling.

Danger of crushing and entrapment.

Upper shaft

Perforated plate

Lower shaft

Содержание CLC Evo























































































Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды

Kverneland CLC Evo, Руководство пользователя

Результаты поиска

Содержание CLC Evo

Отзывы:

Похожие инструкции для CLC Evo

Бренды по названию

Популярные бренды