10
3. Slowly reverse tractor to machine and connect to the towing hitch.
4. Remove the lifting device and solid support from under the transmission casing.
HYDRAULIC SERVICES
1. Connect the ½” hydraulic
pressure
(Green ring) and
return
(Blue ring) hoses to suitable
supply
and
return
outlets on the spool valve at the rear of tractor.
Ensure that the return port has free flow and “zero pressure”, as some spool valves can create a
backpressure that may damage the hydraulic motor and valve block seals.
NOTE!
When the machine is disconnected from the tractor, the hoses should be safely stowed by
placing their quick release connectors into the slots provided on the front panel.
2.
The Kverneland 600 series is supplied with either 3, 4 or 5 bank cable or electric remote control.
CLOSED CENTRE HYDRAULIC SYSTEMS
The Kverneland 600 series diet feeders are supplied for use with tractors equipped with
open centre
hydraulics
. If the machine is to be used with a tractor which has
closed centre hydraulics
, it will be necessary
to purchase a closed centre hydraulics conversion kit (please refer to your Kverneland dealer for details).
When fitting the kit, refer to the instructions below :
