Kvaser U100 User’s Guide
14 (22)
4.6
CAN connector options
This section describes the CAN connector options available for Kvaser U100.
4.6.1
9-pin D-SUB connector (Default)
The default option for the Kvaser U100 is the 9-pin D-SUB connector (see
Figure 7) which has the pinout described in Table 7.
Figure 6: 9-pin D-SUB CAN connector.
Figure 7: The D-SUB 9 connector pinout.
D-SUB pin
Function
1
Not connected
2
CAN_L
3
GND
4
Not connected
5
Shield
6
Not connected
7
CAN_H
8
Not connected
9
Not connected
Table 7: Configuration of the 9-pin D-SUB
4.7
CAN bus termination
Every CAN bus must be terminated with a 120 Ohm resistor at each end of the
bus. The Kvaser U100 does not contain any CAN bus termination, because their
Kvaser AB, Mölndal, Sweden — www.kvaser.com
