Kvaser BlackBird v2 User’s Guide
15 (21)
Figure 8: The D-SUB 9 connector pin numbers
D-SUB pin number
Function
1
Not connected
2
CAN_L
3
GND
4
Not connected
5
Shield
6
Not connected
7
CAN_H
8
Not connected
9
Power supply to the device
Table 6: Configuration of the 9-pin D-SUB
Kvaser BlackBird v2 devices that use the 16-pin OBDII plug (see Figure 9) have
the pinning described in Table 7.
Figure 9: OBDII Connector
OBDII pin number
Function
4
GND
6
CAN_H
14
CAN_L
16
Power supply to the device
Table 7: OBDII pin configuration (showing only connected pins)
5.3
CAN bus termination
Every CAN bus must be terminated with a 120 Ohm resistor at each end of the
bus. The Kvaser BlackBird v2 does not contain any CAN bus termination, because
Kvaser AB, Mölndal, Sweden — www.kvaser.com
