Kvaser BlackBird Getting Started Guide
19 (47)
Figure 14: Generating network keys.
5.5
Network setup and device name
We should now configure an appropriate Device name and choose an address
assignment method. This is done under the Network tab, see Figure 15 on
Page 20.
If you are not sure about your network’s configuration, check with your network
manager. In infrastructure mode, the default selection of DHCP (automatic IP
address assignment) will be the desired selection. If your network requires a static
IP address, you will need to manually enter the IP address, network mask, and
gateway IP address. When using static IP, see Chapter 8.1, Setting static IP on
your computer, on Page 31 for details on how to set a static IP on your computer.
In the Device Name box, you can enter a descriptive name of the device. This
name will be visible when you browse the network using the tool described in
Chapter 6, Selecting the device from the network, on Page 26.
Clicking on the Apply or Ok button will save the configuration to your Kvaser
BlackBird and restart it. You may edit more than one tab before clicking Apply/Ok.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
