Kvaser USBcan Pro 2xHS v2 CB User’s Guide
6 (16)
3
Layout
Kvaser USBcan Pro 2xHS v2 CB consists of a printed circuit board (PCB)
populated with components.
Figure 2: Top view of Kvaser USBcan Pro 2xHS v2 CB
Figure 3: Placement of LEDs (D401–D403 + D406–D408) in top left corner of top
side.
The power LEDs are placed on the top left (D401 and D406), with the CAN LEDs
placed to the right (D402–D403 and D407–D408), see Figure 3. The USB
connector is placed to the left on the top side (CN201) and the CAN connectors to
the right on the top side (CN1701) and (CN1702).
The outline in Figure 4 on Page 7 also shows the four mounting holes which have a
diameter of 3.5 mm.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
