About the RT-2
2-2
RT-2 Operation and Service Manual
About the RT-2
The
RT-2
is a versatile auto-feed table that is normally located in series in a machine line.
RT-2
in a 990-Series machine line. However, the table can be used in any
machine line. The
RT-2
can also be setup as an Inspection Table, and can be paired with an
AR-
HQ2.
FIGURE 2- 1.
RT-2 in a 990 Series Machine Line
Tour of the RT-2 Transfer Table
The door is path is controlled by the sensors on the table.
The sensor circuitry and power are tied into a previous machine’s Electrical-Box as a node.
FIGURE 2- 2.
RT-2 Table Part Identification
Sensors:
Sensors may vary per
table options.
Feed Motor
Fence
