Kval DL-2 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 80

Kval DL-2 Скачать руководство пользователя страница 2

KVAL DL-2 Operation/Service Manual

Proprietary Notice

This Manual is confidential and contains proprietary information and intellectual
property of KVAL Inc., and is to be used solely by Customer as an operating manual
for KVAL Inc. machines. Neither this Manual nor any of the information contained
herein may be reproduced or disclosed under any circumstances without the express
written permission of KVAL Inc. For authorization to copy this information, please
call Kval Customer Support at (800) 553-5825 or fax (707) 762-0485. Outside the
U.S. and Canada, call (707) 762-7367.

Manual Part Number: 0

37_OPSRV_DL2_V1a

The DL-2 Door Light Cut-Out System is a trademark of Kval Incorporated.

Copyright Kval Incorporated. All rights reserved.

Beckhoff

®

, TwinCAT 2

®

, and EtherCat

®

are registered trademarks and are licensed

by Beckhoff Automation GmbH

Windows 7

®

is a registered trademark of Microsoft Corporation.

All other products are trademarks or registered trademarks of their respective holders,
all rights reserved. Reference to these products is not intended to imply affiliation with
or sponsorship of Kval Incorporated.

Contacting KVAL

Customer Service:

For further information about this manual or other Kval Incorpo-

rated products, contact the Customer Support Department

• Mailing address:

Customer Support Department

Kval Incorporated

825 Petaluma Boulevard South

Petaluma, CA 94952

• Phone and Fax:

In the U.S and Canada, call (800) 553-5825 or fax (707) 762-0485

Outside the U.S. and Canada, call (707) 762-7367 or fax (707) 762-0485

• Business hours:

Technical Support:

6:00 AM to 4:00 PM Pacific Standard Time, Monday through Thursday

6:30 AM to 1:30 PM Pacific Standard Time, Friday

Parts & Service Sales:

6:30 AM to 4:00 PM Pacific Standard Time, Monday through Thursday

6:30 AM to 1:30 PM Pacific Standard Time, Friday

(Other sales related inquiries: http://www.kvalinc.com)

• Email: [email protected]

«
1
2
3
4
...
»

Содержание DL-2

















































































Отзывы:

Нет отзывов