4
SDD3 · G
etting S
tar
ted
SDD3 · Getting Started
Rack mounting
The SDD3 will mount in a standard 19” rack system. Use four screws and washers to mount the SDD3 to the rack rails.
We recommend using a shock-mounted rack for touring use to prolong the life of your SDD3.
To prevent accidental adjustment of settings, or unwanted tampering in a fixed installation, KV2 Audio provide an additional
security panel as an accessory.
AC Power requirements
The SDD3 uses a standard IEC 3-pole AC connector. The device must be connected to a mains socket outlet with protective
earthing connection. The SDD3 operates in either 115V or 230V mode. This setup is preconfigured at the factory. The mains
plug of the power supply cord shall remain readily operable.
Voltage requirements
The SDD3 operates safely and without audio discontinuity if the AC voltage stays within the operating window of 90V to130V
in 115V mode or 180V to260V when working in 230V mode at 50 or 60Hz.
IF THE ANY LED DOES NOT ILLUMINATE OR THE SYSTEM DOES NOT RESPOND TO AUDIO INPUT REMOVE AC POWER
IMMEDIATELY. VERIFY THAT THE VOLTAGE IS WITHIN THE PROPER RANGE. IF THE PROBLEM PERSISTS, PLEASE CONTACT
KV2 AUDIO OR AN AUTHORIzED SERVICE CENTER.
Connector wiring
XLR Balanced Input and Output connectors.
IF IT IS NECESSARY TO CONVERT BALANCED OUTPUT TO UNBALANCED, IT IS IMPOSSIBLE TO SHORT HOT(2) OR COLD(3)
PINS WITH GROUND(1). IN THIS EVENT THE LINE DRIVERS WILL CAUSE PERMANENT DISCONNECTION.
FOR MORE INFORMATION PLEASE REFER TO PAGE 18.
1 = Ground
2 = Hot (+)
3 = Cold (-)
Unpacking
Unpack the SDD3 and check to see if there is any damage to it. If you find any damage notify your supplier immediately.
Only the consignee may institute a claim with the carrier for any damage incurred during shipping. Be sure to save the carton
and all packaging materials for the carrier’s inspection.
Should you ever need to ship the unit, only use the original factory packaging. If the shipping carton is unavailable, contact
your supplier to obtain a replacement.
The SDD3 carton should contain:
• SDD3 Super Digital Audio Delay
• User's Guide
• IEC Power Cable
