SDD3 · Setup
Memory
New memory
SDD3 is equipped with a dynamic memory list with up to
30 memory positions. New memory can be created when
pressing ENTER at
New
in the memory list.
When a new memory is created, it is marked with a position
number from 1 to 30 whilst the memory function select is
switched to the rename position.
Rename memory
Memory name can contain up to 8 letters, space or numbers.
To rename a memory select the memory position to
rename
and select rename at the memory function list, press
ENTER
.
When renaming, the renaming letter flashes, select the
required letter by rotating the encoder. Switch between A - Z,
a - z , spacebar 1 - 9 using
CHAN/NEXT
button.
To jump to the next letter position, press
ENTER
.
To exit renaming press
FUNC/EXIT
button.
When new memory is created the actual setup
is automatically saved.
Save to memory
All delays, units, delay mode, and cardioid setup are saved
into the memory.
To save to memory, select the memory position to save in
and select
save
from the memory function list, press
ENTER
.
When saved, the memory number, is shown in the top right
corner.
Memory recall
To recall from memory, select the memory position to recall
and select
recall
at the memory function list, press
ENTER
.
When recalled, the memory number, is shown in the top right
corner.
Delete memory
To delete a memory, select the memory position to delete
and select
delete
in the memory function list, press
ENTER
.
SDD3 · S
etup
13
