KV2 Audio KVV 987 446, Руководство пользователя

Страница: 8 / 20

VHD3200D · Features · Rear panel
Rear panel
1) Main Input A & B / Through Out
These are the input XLR connectors for channel A & B with associated 'Through Output' connectors for sending signal
to other devices.
2) Bridge Mode Switch
When operating the VHD3200D in bridge mode, (bridge switch pressed), Input A serves as a bridge mode input, bridge
output (9) serves as speaker output. Input B is not active.
3) PowerCon Power Connectors
The VHD3200D Amplifier uses two connectors per two channel. Each connector supplies one channel. One for each channel
of the VHD3200D both must be connected to operate both channels of the VHD3200D. They accept standard PowerCon
terminated AC Mains cables.
4) Fans
The cooling fans operate continuously while the VHD3200D is on. An internal temperature sensor increases the speed
of the fans during high temperature conditions. Air enters through the front grille and exits through the rear. Be sure
to allow adequate air flow to the front of the rack in which the VHD3200D is mounted.
Communication
5) Reset
Serves as factory reset button. Resets all setup, including network settings (default settings AutoIP/DHCP). Use a tool with
maximum diameter 2mm.
1 2 3 4 5
6
VHD3200D · F
ea
tur
es · Rear panel