KV2 Audio EPAK2500R, Руководство пользователя, Страница: 9 / 22

8
EP
AK2500R · U
sing the S
y
stem
EPAK2500R Setting Internal External
Setting 1 1 x ES1.8 + 2 x ES1.5 1 1 x ES1.8 + 2 x ES1.5 1
Setting 2 2 x ES1.5 2 2 x ES1.5 2
Setting 3 2 x ES1.8 2 x ES1.8
Setting 4 1 x ES2.5 1 x ES2.5
Setting 5 1 x ES2.5 2 x ES1.8
Setting 6 (5-way system) 1 x ES2.5 2 x VHD1.21 3
EPAK2500R · Using the System
Normal Set Up
The EPAK2500R is designed to actively power one ES1.0 cabinet and associated subwoofer systems. For Normal Mode
operation signal is applied to the 'Main Input' connector and all the 'Insert' switches would be in the 'Disengage'
position.
The Input Z switch should be set to match the output impedance of the device feeding the EPAK2500R. If you are using
B7)%-%-JOF%SJWFSUIFOUIF*OQVU;TXJUDIPOUIF&1",3TIPVMECFTFUUPȰ*GXIFOVTJOHUIF-%ZPVBSF
feeding more than one EPAK2500R then they should all be set to 10kΩ with the last one in the signal chain set to 50Ω.
Six different combinations of subwoofers are accommodated for when using the EPAK2500R.
The combinations are as follows:
Notes on Subwoofer Combinations
1. Setting 1 is set up for driving 1 x ES1.8 + 2 x ES1.5. It can also drive 1 x ES1.8 + 1 x ES1.5, in this mode the relevant
Sub level control (either Internal or External) should be increased by up to +6dB.
2. Setting 2 is set up for driving 2 x ES1.5. It can also drive 3 x ES1.5, in this mode the relevant Sub level control (either
Internal or External) should be decreased by -3dB. This setting can also drive just 1 x ES1.5 with the relevant Sub
level control adjusted accordingly, dependant on the application.
3. Setting 6 is a true 5-way setting. The ES2.5’s are actively crossed over with the VHD1.21's.
Subwoofer Impedance
ES1.5 16Ω
ES1.8 8Ω
ES2.5 4Ω
ES2.6 8Ω
VHD1.21 8Ω
ES Subwoofers Impedances