KV2 Audio EPAK2500R, Руководство пользователя, Страница: 12 / 22

11
EP
AK2500R · U
sing the S
y
stem
EPAK2500R · Using the System
Feeding the Subwoofers from another source
Taking the following diagram as an example, if the ES1.0 was flying you might want to fly one ES2.5 above it with the
other two ES1.8's ground stacked beneath. In this instance it would be preferable to have both sets of subwoofers fed
by separate feeds from the mixing console, to give you independent level control to each of the subwoofer types,
and to have the ES1.0 fed by the main output from the mixing console:
'Internal' denotes subwoofers powered by the internal subwoofer amplifier.
'External' denotes subwoofers powered by an external VHD3200 subwoofer amplifier,
fed from the EPAK2500R's External Sub Out connector.
Internal Sub
Insert Switch
Position
External Sub
Insert Switch
Position
Internal Sub
Signal derived
from
External Sub
Signal derived
from
Disengage (Out) Disengage Main Input Main Input
Engage (In) Disengage Internal Sub In Internal Sub In
Engage Engage Internal Sub In External Sub In
Disengage Engage Main Input External Sub In
The table below shows the various combinations of the Sub Insert switches and their effect on the signal
routing in the EPAK2500R: