Kuzar K-1, Руководство пользователя

Страница: 10 / 24

10
K-1
Operating Instructions -
ENGLISH
4.5.- Hold:
Release the winch handle, it will remain in position by the action of the
ZLQFK¶VDXWRPDWLFEUDNH(QVXUHWKH.$7ORFNKDVLQWURGXFHGLQWRWKHSUR¿OHE\WXUQLQJ
the handle slightly anti-clockwise.
4.6.- Continue elevating: Turn the winch handle again clockwise and lift the load until
WKHVHFRQGSUR¿OHLVIXOO\H[WHQGHG5HOHDVHWKHKDQGOHZKLFKZLOOUHPDLQ¿[HGE\WKH
winch’s automatic brake and proceed to ensure that the KAT lock has introduced into the
VHFRQGSUR¿OHE\WXUQLQJWKHKDQGOHDJDLQDQWLFORFNZLVH7KHWRZHUFDQEHVWRSSHGLQ
any desired intermediate position. Simply release the winch handle and secure the tower
by inserting the corresponding KAT lock into the hole which is closest to the required
position.
4.7.- Descent: Descending the load follows the same procedure but in reverse. Firstly
XQORFNWKH.$7ORFNDQGWXUQWKHZLQFKKDQGOHDQWLFORFNZLVHXQWLOWKH¿UVWSUR¿OHLVFRP
-
SOHWHO\IROGHGGRZQ1RZXQORFNWKHQH[W.$7ORFNDQGUHWUDFWWKHVHFRQGSUR¿OH-XVWDV
when lifting the load, the lift may be stopped at any intermediate position.
4.8.- Transport: When transporting / carrying the lift it is necessary to fold the tower by
UHWUDFWLQJDOOWKHSUR¿OHVFRPSOHWHO\7KHQFORVHWKHVOLGLQJVXSSRUWSLHFHDQG¿[LWZLWK
the safety lock and tightening the knob.
5.- MAINTENANCE.
5.1.- All cables must be checked regularly. Faulty cables must be replaced immediately.
Do not use the lifter with faulty cables as it is potentially very dangerous. Only use DIN
3060 cables, supplied from an authorised dealer.
5.2.- The lifter is delivered ex factory completely greased. Depending on its mechanical
use though, we recommend that the crown wheel of the winch, the pads & bushings of
WKHGULYHVKDIWWKHKDQGOHWKUHDGDQGWKHSUR¿OHVRIWKHOLIWDUHSHULRGLFDOO\JUHDVHG
ATTENTION:
Do not apply oil or grease to the brake mechanism.
The brake discs have been pre-greased with a special heat and pressure resistant grea-
se. To avoid malfunction to the winch brake, no other products must be used except the
original provided by the company. It is not necessary to grease the brake discs.