Kuvings SV-500, Руководство пользователя

Страница: 7 / 10

13 12
2
1
- After purchasing the product, clean the Container and Blade Assembly with dish detergent before using.
- At the initial use, Body may generate a little amount of smoke and smell.
(This is caused during the motor drying process and will disappear after a few times of use).
- Each function has a Smart Auto-Control function, which automatically stops operation when ingredients
become the optimal condition.
4
How to operate
Put ingredients in the Container and close the Container Lid.
- Ingredients should be cut to less 3cm and put
under maximum capacity.
- Check if the Container, Container lid
and Vacuum Valve are perfectly combined.
- Do not blend other ingredients except coffee
beans, almonds, nuts etc.
(Do not vacuum when blending.)
②
②
Check if the Container, Container Lid and Vacuum Valve are perfectly combined.
- Place the handle of the Container forward.
(Place the magnetic part at the bottom of the Tumbler forward and operate the "Vacuum" function.)
- Check if the Vacuum Port part of the Body is perfectly combined with the Noise Reduction Cover.
- Noise Reduction Cover is equipped with the Vacuum function.
①
①
_
A. Container
①
_
B. Tumbler
<
Side view
>
Turn the Power on.
3
- LED of the Dial button is turned to and the buzzer goes on.
Bee
~
Press the Dial button once to enter stand by ,
and select a menu button to operate the product.
- When in Vacuum mode, the LED on the Dial button turns .
- The LED turns once Vacuuming has finished.
- Vacuum Error: LED on the Dial Button flashes to or The Button
on the menu flashes with a beep.
When it is complete, turn the Power off
and separate the power plug.
5
Open the Noise Reduction Cover and lift up the Vacuum Valve to clear the
vacuum.
6
- The vacuum should be cleared with the
Vacuum Valve to open the Container Lid.
- After performing instant operation, manual
operation and Auto-Blending, clear the Vacuum
with the Vacuum Valve to open the
Container easily.
- Press the Dial button to stop.
- Function stop: Press on the Dial Button or the Dial is turned to
while in operation, the function stops.
- Turn off the power, and Dial to when using the product again.