Kuvings M12 Скачать руководство пользователя страница 11

21

20

HOW TO USE THE CLEANING TOOL

Hold the cleaning tool with one hand and insert 
the strainer into the cleaning tool.

HOW TO CLEAN SILICONE PARTS

Silicone Brush

Pull out the silicone brush from 
the rotation wiper to clean. 

After cleaning, insert into the slot 
with the tail pointing down as 
shown in the illustration.

Silicone Ring

Remove the silicone ring from 
strainer to clean. 

After cleaning, push in the silicone 
ring.

Smart Cap

Remove from the juice spout  
to clean. 

After cleaning, attach the smart 
cap to the smart cap silicone on 
the juice spout.

Clean the rotation wiper under running water. 

Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicone ring is 
firmly inserted.

If the silicone ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.

Tip      |

Note  |

The cleaning tool makes clean-up quick and easy.   

Completely dry after cleaning.

Tip      |

1

After cleaning, remove the strainer from the 
cleaning tool. Dry before storing.

4

Under running water, rotate the cleaning tool 
and the strainer in opposite directions to clean.

2

Thoroughly rinse the inside and outside of 
the strainer under running water.

3

Note   |

Insert the strainer until you hear a click.

* The products illustrated in this booklet may vary slightly from the actual product. 

Cleaning inside of the bowl

Please unscrew the cover on the bottom and clean inside. 
After cleaning, make sure that protrusion part of gear is 
placed on the outer part so it fits (connects) with the drum.
Sequence of assembly is in reverse order of disassembly.

Содержание M12

















Отзывы: