®
manufactured by port-a-cool, llc
Port-A-Cool Mexico, S. de R.L. de C.V.
•
Paseo de la Reforma #404 piso 4
•
Col. Juárez
México DF 0660
•
www.KuulAire.com
Port-A-Cool, LLC
•
709 Southview Circle
•
Center, TX 75935
•
www.KuulAire.com
6
7
6
7
Symptom
Possible Cause
Possible Solution
No discharge of air
Cord is not plugged in
Make sure cord is plugged in and try to turn the unit on pressing buttons
Power is not on
on control panel and remote control. Check the circuit breaker or check
Circuit breaker/gFCI
gFCI reset button.
Water tank is not locked properly
Make sure the water tank is assembled and locked properly.
Not cooling
Pump is not turned on
Check the water level and turn on the pump by pressing COOL button.
Low/No water
Make sure COOL button/Low Water icon are not flashing (low/no water) -
refill the tank
Damaged pump
Replace pump
Odor emission
Brand new unit
Brand new cooling pad will initially have an odor which will dissipate within a
Old unit with algae
week of initial use. If the unit is not new, there may be an algae issue
– replace the pad and maintain regularly.
Water droplets coming
Calcium saturated water
Drain water, deep clean and clean the cooling pad.
out of air outlet
Clogged cooling pad
Cooling pad may need to be replaced.
The unit will not respond Damaged PCB
Try with remote control. If the unit responds, PCB board fasteners loose.
Moisture in PCB
If neither control panel nor remote control command works, PCB board
Remote control batteries
damaged – replace PCB.
Try using remote control to see if the unit responds. If the unit responds
briefly, likely cause is the moisture in the PCB. Turn off unit by unplugging
it from the power. Drain, clean and dry the unit, possibly replace the cooling
pad. Refill it with fresh water.
Check batteries.
Unit is making noise
Calcium build up in blower
Deep clean the unit -remove calcium debris.
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
�
�
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
NOTES
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Model No.
KA55
Voltage
120VAC
Frequency
60Hz
Current
2.4 A
Water Tank Capacity 8 gallons
Dimensions
H 34” x W 18” x D 14”
Shipping Weight
30 lbs.
Motor
Class A, Themally Protected
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
�
�
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
NOTES
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Model KA55
www.sylvane.com 1-800-934-9194
