If you have any questions regarding this product, call 1-800-642-2112 and ask for our product
specialists (Mon.-Fri. 9:00 am – 5:00 pm EST) or email:
See many more products on the Internet!
www.improvementscatalog.com
To order, call 1-800-642-2112
▲
5
CLEANING AND MAINTENANCE
!
WARNING:
Unplug the unit from power outlet prior to
moving, servicing, filling or draining the water tank.
Cleaning:
Dampen a clean cloth with water and use it on the exterior
of the unit to remove any dust or dirt. Never use harsh detergents,
solvents, or corrosive cleaners to clean the unit. When not in use, drain
the water tank and store the unit in an area where it is dry and out of
sunlight.
Maintenance:
Regular draining, at least once each week, will decrease
the water mineral build up and extend the life of the pad. A damp cloth
can be used to remove calcium build-up inside and outside of the unit.
When operating the unit, turn off pump pressing the COOL button until
indicator light goes off, to dry out the pad before shutting off. The inside
of the water tank should be cleaned once or twice in a season to maintain
air quality.
Deep Clean:
Removing Water Tank:
The KA45 comes with an easily removable
water tank. Make sure the unit is unplugged from the power outlet.
Unclip the water tank locking clips on both sids. Lift up the body of the
unit and lay it gently on the floor. Be cautious of the pump swing arm
and make sure the pump swing arm folds horizontally. Clean the tank
with water and soft cloth. You may use mild soap or detergent.
Removing the Cooling Pad:
Remove two screws holding the rear
grille assembly and remove the rear grille. Remove two screws holding
the cooling pad frame. Pull out the cooling pad
frame. Remove two screws at the bottom of the pad frame to remove
the water catch pan. Pad will slide out at the bottom of the pad frame.
Using water and soft brush clean the cooling pad of debris, dirt, and
mineral build ups.
Be sure to clean the top of the cooling pad. Do not use any cleaning
agent.
When reassembling the cooling pad, make sure the descending
flutes in the cooling pad face outside.