___________________________________________________________________________________________
2
EA448B
NOTICE
1.
AVR could be installed in any suitable
locations of the generator sets, the
appearance and fixing holes are as (Figure
1)
2. To ensure safety and avoid the permanent
damage to the AVR caused by the high
pressure, make sure remove the connection
wiring
on
the
AVR
before
using
megohmmeter and the voltage meter.
3. Make sure tie up the connection wiring of the
AVR when installing in a high-vibration
environment. The cooling fin could release
the high temperature under the normal
operation, please do not touch.
SECTION 1: SPECIFICATION
Sensing Input (E1
、
E2) Average Reading
Voltage Regulation
Voltage
95
520 Vac 1 phase 2 wire
Less than +/- 0.5% ( with 4% engine governing )
DIP Switch Settings
Adjustment
95
140 Vac @ 110 Vac
Typical System Response
170
260 Vac @ 220 Vac
0.3
1 seconds @ +/- 20% Voltage Vibration
340
520 Vac @ 380 Vac
Frequency
50/60 Hz Jumper selected
Static Power Dissipation
Max. 4 watts
Power Input (X1
、
X2)
Voltage
40
150 Vac 1 phase 2 wire
Under Frequency Protection
Frequency
40
500 Hz
50 Hz system knee point at 45Hz
60 Hz systems knee point at 55Hz
Auxiliary Input (Z1
、
Z2)
Voltage
40
150 Vac 1 phase 2 wire
Over Excitation Current limitation
Frequency
40
500 Hz
3.5A to 10A (EXC.MAX. Adjustable)
Excitation Output (E+
、
E-)
Voltage Thermal Drift
120V 1 phase Continuous 110 Vdc 7A
Less than 3% from -40 to +70 °C
Max. 160 Vdc 10A 10Sec
Resistance
Min. 15
Ω, Max. 100Ω @120V
Environment
Fuse Spec. Slow blow 5 x 20mm 10A
Operation Temperature
-40 to +7
0 ˚C
Storage Temperature
-40 to
+85 ˚C
External Voltage Adjustment
(1KΩ)
Relative Humidity
Max. 95%
Max. +/- 10% @ 1
KΩ 1 watt potentiometer
Vibration
5.5 Gs @ 60 Hz
Quadrature Droop Input (S1
、
S2)
Dimensions
CT N:1A
203.0 (L) x 153.0 (W) x 60.5 (H) mm
Sensitivity
+/- 7%@ PF +/- 0.7 (STAT. Adjustable)
7.99 (L) x 6.03 (W) x 2.38 (H) inch
Build Up Voltage
Weight
5 Vac 25Hz residual volts at power input terminal
850 g +/- 2%
1.874 lb +/- 2%
Soft Start Ramp Time
3 s/- 10%
SECTION 2: DEMISION
[5.51"]
140.0
[2.95"]
75.0
115.0
[4.53"]
100.0
[3.94"]
[7.87"]
200.0
[2.36"]
60.0
Unit : mm
[0.71"]
18.0
[inch]
M5 L30
Figure 1. Outline Drawing
