Kustom Signals Pro-Lite, Справочное руководство

Страница: 38 / 50

Pro-Lite Operator’s Manual
Page 32
Stopwatch Measure Mode
In addition to the "enter distance" mode, the unit enables
the operator to measure a distance to be used using the unit’s
ranging capability. To access this mode, the operator should
select MEASURE from the STPW Menu.
The initial MEASURE screen appears below:
To obtain a range, aim the unit at a target and depress
the trigger. The range appears in the area next to "Dist1".
After a suitable range is obtained, press TEST /
▼ ARROW.
The next screen appears:
If the second point is the location where the operator is
standing, simply press
TEST /
▼
ARROW
and the Pro-Lite uses
"Dist1" as the total distance, or you can obtain a second range
by aiming the unit at another target and depressing the
trigger.
NOTE: You must aim at targets that are in the same
plane. Do not aim at a target to the left of
your position, then turn 180
°
and aim at a
target to your right.
STPW Measure
Dist2
Stopwatch
MEASURE
Stopwatch
Dist1