Kustom Signals Pro-Lite, Справочное руководство

Страница: 15 / 50

Pro-Lite Operator’s Manual
Page 9
2. When the trigger is depressed and laser pulses are
being transmitted, the HUD will display four dashes
"----" indicating that the laser is being fired and that
the instrument's range and speed measurement
functions are activated. Display of the dashes in the
HUD occurs simultaneously with the illumination of
LCD characters directly beneath the "Speed" and
"Range" text on the rear display panel. This confirms
that laser activation has taken place, and the operator's
attention is not diverted from the HUD.
3. When the speed of a moving target has been
determined, the speed will be displayed on the HUD.
The speed of a receding target will be displayed with a
"-" prefix, and the speed of an approaching target will
be displayed with no prefix.
When status messages arise, the HUD will read,
"
HELP
", referring the operator to the rear panel displays for
further information. Examples of such status messages
occur during Low Voltage or error conditions, or when self-
test failures are detected.
These indications in the HUD allow the operator to
track vehicle speeds and to monitor critical operating
conditions without having to divert attention from the
target vehicle and its surroundings.
Pro-Lite HUD version
1. When the trigger is depressed and laser pulses are
being transmitted, four dashed lines (----) will be visible
below the reticle, indicating that laser activation has
taken place. The operator's attention is not diverted
from the HUD.
2. When the speed of a moving target has been
determined, the reticle will flash indicating a locked
speed and the speed will be displayed below the reticle.