Section 12—Troubleshooting
12.6
Speedometer input will
not synchronize
Verify unit is not in HOLD.
Verify the speedometer input
cable is connected properly.
Verify the remote control is
connected properly.
Patrol speed must be between
30-70 MPH (48-112 km/h)
(Refer to Sec. 6.7).
If above tests fail, remove
speedometer input cable from
rear panel and depress TEST
switch. Unit will now function
as a standard radar.
Short range
Verify the range control is
properly set for the desired
distance to the target vehicle.
Verify the desired antenna is
selected.
Verify the antenna is properly
aimed.
Verify the unit is not in the
HOLD mode.
Verify there are no obstructions
between the antenna and the
target.
Weather conditions (heavy rain,
snow or fog) may limit range.