SHORE POWER ON
GREEN LED lighting on “Line Mode”
INVERTER ON
GREEN LED lighting on “Inv Mode”
FAST CHARGE
YELLOW LED lighting on “Fast CHG”
FLOAT CHARGE
GREEN LED lighting on “Float CHG”
OVER TEMP TRIP
RED LED lighting on “Over Temp”
OVER LOAD TRIP
RED LED lighting on “Over Load”
POWER SAVER ON
GREEN LED lighting on “Power Saver on”
Please refer to ‘Indicator and Buzzer’ for the detailed information.
Apart from the switch panel on the front of the inverter, an extra switch panel connected to
the RJ45 port at the DC side of the inverter through a CAT cable can also control the opera-
tion of the inverter remotely.
If an extra switch panel is connected to the inverter via “remote control port”, together with
the panel on the inverter case, the two panels will be connected and operated in parallel.
Whichever first switches from “Unit Off” to “Power saver off” or “Power saver on”, it will pow
-
er the inverter on.
If the commands from the two panels conflict, the inverter will accept command according to
the following priority:
Power saver on> Power saver off> Power off
Only when both panels are turned to “Unit Off” position, will the inverter be powered off.
The suggested length between the switch panel and inverter is 32 feet
WARNING
Never cut the telephone cable when the cable is attached to inverter and battery is connected to
the inverter. Even the inverter is turned off, this will damage the remote PCB inside if the cable is
short circuited during cutting.
15
170 Cherry Avenue
West Sayville, NY 11796
www.kussmaul.com
Ph: 800-346-0857
Fax: 631-567-5826
