Each Transmitter and Receiver has a dip switch, the setting of which determines
the code sent and received.
The dip switch in the Transmitter and it’s corresponding receiver
must be set to the same code
The units are normally coded OFF, OFF, OFF, OFF, OFF for single Receiver
systems. For multiple Receiver systems, each receiver is given a separate code.
The corresponding transmitters must be set to the same code.
To change the code, remove the Transmitter and Receiver top covers and
change the dip switches.
INSTALLATION EXAMPLES
Figures 3 a nd 4 show possible installation examples for the Model 091-133
Transmitter and Receiver. There are many other possible installations. Consult
Kussmaul Electronics Co. Inc. Engineering Dept.
to discuss your particular problem.
ON
1
2
3
4
5
