DESCRIPTION
The instructions in this manual contain important information on the safe mounting, usage, cleaning and maintenance of
the device. Thus, keep the manual at a place easily accessible by the person who will use the machine, and the
technician.
Mounting, conversions for different gas groups or electrical inlet, and maintenance works of the device should be
performed by a specialist authorized in this subject and in accordance with the instructions of the manufacturer
company.
Gas and electrical connections of the device should be arranged according to the tables and electrical diagram given in
this manual.
Manufacturer company accepts no responsibility for the final damages incurred in humans or properties that are caused
by any procedure not conforming to the instruction manual, or maintenance or technical interventions that are not
performed by authorized people.
MOUNTING INSTRUCTIONS
Placement
Place the device beneath a filtered exhaust hood in order to eliminate smell and fume that may be emitted during
cooking.
Place the device at a place min. 10cm away from the side or back wall to prevent excessive temperature rises.
Remove the nylon protection cover on the device. If there are any adhesive residues left on the surface, clean with a
suitable solvent.
Balance the device by adjusting its four adjustable legs on a suitable ground.fig.A
Mount the pan lifting arm.
Gas Connection
Connection to the gas installation should be made with flex pipe and ball valve. Fix the said ball valve to a place that is
away from heat and easily accessible in case of a danger.
Gas connection must be done according to national and local gas standarts .
Gas inlet is indicated by GAS label on the appliance body
After all connections are completed, check for gas leakage at joints through leakage detection device or soapy water.
Check whether the device is suitable for connected gas type. If not, see “Conversion to Different Gas Types”
ATTENTION:
All adjustments and modifications to be performed on the
gas installation and connection of the device should be performed by
authorized people.
Water connection
Connect the water inlet to the water supply through a tap.
Mount a mechanical filter on the water inlet of the device and the dirt and metal particles that may intrude in the device
will be prevented through that filter.
Before connecting the last pipe part to the machine, clean the accumulated dirt by discharging some water and then
complete the connection.
Check whether there is any leakage at the joints.
Electrical Connection
Connect the device to a proper network according to the electrical installation standards of the relevant country.
Feed the device with suitable network voltage written on the information plate.
Connect to the electrical installation over a suitable automatic fuse. Fix the said fuse on a place that is easily accessible
in case of a danger.
The cable connecting the device to the electrical installation should be at least of H05 RNF quality and its section
should be selected to be sufficient to carry the maximum current.
It is recommended to include a leakage current fuse in the feeding installation.
Voltage tolerance should not exceed ± 10%.
If the device will be used in a commercial kitchen, apply a correct grounding system. Here, consider DIN VDE D100
Article 540.
The device must be grounded. Grounding point is marked with "
".
