ADJUSTMENT ACCORDING TO DIFFERENT GAS TYPES
If the device is connected to gas installation, close main gas inlet valve.
Replacement of burner nozzles
1.
Dissemble front panel of the grill. Unscrew the nozzle at the burner
inlet using a suitable wrench. (Figure 4)
2.
Replace nozzle “A” with a nozzle suitable for the gas type to be used
taking the values given on Table 1 into consideration (Figure 6).
3.
Loosen the air inlet adjustment bolt “B” of the burner and move Venturi
pipe forward and back (Figure 5).
4.
Replace the flame nozzles of pilot burner “C” with a nozzle suitable for
the gas type taking the values given on Table 1 into consideration. For
this purpose, it is enough to dismantle coupling “D” and pull the gas
pipe down (Figure 3).
OPERATOR INSTRUCTIONS AND ATTENTION POINTS
Before cooking with the pasta cooker, operate it with no load for a while. Thus, the
protection oil on it will disappear and it will become ready to use.
Clean the pasta cooker container using suitable cleaner agent every day.
Clean the oil drawer inside the cabinet after each use.
If you will not use the pasta cooker for a long time, cover the container with
suitable liquid oil and keep away from moisture.
Do not operate the pasta cooker with its back funnel mouldings removed or closed.
Never leave any uncovered food in the cabinet section of the devices.
